Would you like to put in a photo in your quilt that looked similar to part of the fabric than an iron-on decal?

Before, we relied on photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an incredible new method of getting your best photo away from your scrapbook and to your quilt block.

Direct-to-garment (DTG) printing is a form of digital printing. Using a cost of about $20,000, it’s not practical to run out and acquire your own DTG printer. The standard price for coffee printer is $8 to $10.

This technique is a touch more pricey compared to the traditional photo transfer method. That’s partially for the reason that technology is really new. If you do decide to try out a DTG photo on the memory quilt block, there are some factors to consider in selecting the printer which will carry out the be right for you:

1. Ensure you can find no chemicals necessary to pre-treat your fabric first. Some DTG printers create a picture that may be a lot more like screen printing. You don’t want that appear or feel in your quilt. The ink will likely be hard along with the material and may eventually (sometimes much sooner than later) are going to crack and wear with washings. Ask your prospective printer to see a sample of something they’ve printed. If you can experience the ink is raised above the surface in any respect whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing available from the Brother GT 541. You will find no chemicals necessary to pre-treat the material. The inks bond using the natural fibers and so are heat cured setting the graphic. The inks are water based, which will help leave a soft yet crisp image on your fabric.

There are a few downfalls to using led uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing is really a form an electronic printing, there is no white ink. White is the absence of color. Which means that you can not print a photo on navy blue or black fabric.

Digital garment or fabric printing can be a CMYK format – cyan, magenta, yellow, and black. It is possible to mix those colors to have a full spectrum of accurate colors – hardly white. You can find DTG printers that print white ink, but many of people require chemical pre-management of the material and can leave you with that thick surface print.

You need to utilize a light colored or neutral fabric and it needs to be cotton or perhaps a cotton blend. The fabric must have the capacity to withstand 350 degrees for roughly 30 seconds. If you are not 09dexypky with totally cotton or even a 50/50 blend, ask your printer in case the fabric works.

Size of your print might be a limitation. Most DTG printers have got a printing field as much as 14 inches x 16 inches. For most quilters, that size range won’t be described as a problem.

And speaking of printing fields, here’s a hint. Most direct to dtg printer charge for the 14×16 surface. In case your blocks allows 2 or 3 photos to put within that range, you could get them printed for the buying price of one. Consult with the printer to ascertain if it’s possible with your particular project.

Like other technological advances, the cost of digital garment (or fabric) printing probably will decrease as time passes. Maybe it is going to also be on smaller printers for home and private use. For the time being, see if you can locate a DTG printer for your forthcoming photo quilt project. The outcomes may be like custom fabric, that will be a fantastic touch for your personal original quilt!